Kirby G6 Bagged Upright Vacuum "put belt" Questions

Ad

Question about Eureka Vacuums

1 Answer

...put belt on a Eureka "Boss." Much like a toilet paper dispenser, the motor shaft pully sits in a plastic channel, turning in place on two pegs. I can't squeeze the belt past these pegs. Any ...

Ad

Question about Kirby Vacuums

2 Answers

...the bottom plate on then turn the big knob on the from until it locks(it will catch the belt)put the nozzle back on the vac, lock it down, and turn the knob to release the belt unto the motor

Ad

...put on the belt on the brushroll, put the brushroll into the housing making sure the marks on the end of the brushroll are the same. Take the spin dial in the front and "hook" the belt till the dial ...

Question about Hoover Vacuums

1 Answer

...Put the new belt over the wooden pulley on the roller and put it almost back in. Put the other end of the belt over the motor shaft. Stretch the belt by returning the roller to its slot. Put the sole ...

Question about Hoover Vacuums

2 Answers

...put the belt over the roller and re-install it, then put the bottom plate back on, then turn it over, undo the motor and put the belt on the motor pulley, re-install the motor and put the rest back ...

Question about Kirby Vacuums

1 Answer

...space and up not down.. the the hook should hook onto the belt quite easily.. put the head onto the vax front and turn to green for go. the green light should be on if u put the belt on correctly

Question about Dirt Devil Vacuums

1 Answer

...put the belt on the deit devil breeze how to put the belt on the dirt devil breeze badless Here is a detailed discription on how to change your belt. Turn the machine compleatly upside down and place ...

put the belt around the roller, put back in and replace plate, you need to make sure the belt is on the roller correcty, make sure is at the red position when putting the part back on with the belt on

...loose. When putting the new belt, you need to insert the belt into the pin first and then put the other end of the belt onto the roller. Then pull the roller and put it back into its groove.

Question about Bissell Vacuums

1 Answer

put the belt over the metal part and around rotating brush and started the vaccum the belt broke again You did not put the belt on its proper place that's why it happen. Replace again the belt and

Not finding what you are looking for?
Kirby G6 Bagged Upright Vacuum Logo

238 questions posted

Ask a Question

Usually answered in minutes!

Top Kirby Vacuums Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Paul Bade

Level 3 Expert

1818 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Kirby Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...