Kirby G6 Bagged Upright Vacuum "brush roller spinning" Questions

Ad

Question about Eureka Vacuums

1 Answer

...Roller Brush Assembly, Part 61520 (Only if the brush no longer spins, or the brushes are worn out) - Phillips head screw driver Step 1. Turn the vacuum upside down so that the brush roller is facing ...

Ad

...roller brush with motor oil. Bearings inside the roller brush need lubrication for the brush to turn easily. Remove any pieces of thread that have wrapped around the roller brush. If it does not spin ...

Ad

...roller brush itself may be bad and need replacing. If the roller brush's bearings lock up, and the brush can no longer spin freely, this will cause the belt to burn up immediately after you turn the ...

brush roller on windtunnel won't spin Hoover self propelled windtunnel w/bag, Model U6445-900..the brush roller won't spin. It appears that the small roller that should move into place to put tension ...

Question about Dyson Vacuums

1 Answer

...roller brush does not spin, it can only be caused by one of two problems. The Dyson DC07 uprights use a clutch mechanism to control the brush spinning when you change the floor / carpet switch. When ...

roller brush. Take the belt off of the roller brush and see if the brush spins freely, if not, remove the roller brush and check both ends to see if one end is stuck. If so you need a new roller brush

...roller brush itself might be bad. Try holding the roller brush holding just the end caps with your finger tips, and spinning the roller. Does the roller spin freely? If no, this indicates that your ...

Question about Dyson Vacuums

1 Answer

...roller brush on the bottom of the vacuum. I cleaned it off and now the roller doesn't turn and when the setting is on carpet, it makes a loud buzzing noise. Hello, When a Dyson DC07 makes this ...

Question about Dirt Devil Vacuums

3 Answers

...roller brush end). Motor arm is rough and sheers though the belts immediately. Can this part be replaced? HI There, Usually when the belt breaks immediately, this indicates that your roller brush has ...

...roller/brush on the bottom of the unit has a metal bearing inside the roller/brush that can become clogged with hair (both human and pet hair) which effects performance of the unit. It?s fairly easy ...

Not finding what you are looking for?
Kirby G6 Bagged Upright Vacuum Logo

238 questions posted

Ask a Question

Usually answered in minutes!

Top Kirby Vacuums Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Paul Bade

Level 3 Expert

1818 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Kirby Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...