Kirby G4 Bagged Upright Vacuum "safety switches" Questions

switch bad how do I bypass switch Monica, I highly recommend you replace the switch. By passing the safety of a switch on any appliance or tool endangers both yourself and those around you. Just to by

...a generation 3 kirby- it was working - I turned it off & it will not turn on again - is there a safety switch /reset button or did the on/off switch go out - I have had it 15 years & replaced the ...

I have the bag unhooked and the hose connected to the motor which has engaged the safety switch but the Kirby will not turn on to blow air Blower instructions HERE. It MUST help. If you put it back ...

Shark hand held navigator brush won't spin What I see most often is the safety switch in the nozzle goes bad. Shark vacuums are considered disposable and they don't sell parts. That doesn't mean it ...

...was spinning so I don't see it being a burnout? is there a reset switch or fuse? any thoughts. or safety triggers? Internal breaks in the power cord is the common cause of failure followed by the ...

...and make sure that the bag emptor(bottom of bag asm.) is pushed up against the casing. There is a safety switch there that may not ne engaged. Cord may be bad, one side of the line may be open. ...

...at least on the labor. Try removing the nozzle and poking a screwdriver in the little slot for the safety switch and seeing if it runs. Maybe the nozzle's poker isn't pushing it in adequately? ...

...switches or buttons that i may of missed as i have no instruction manual thanks There is a safety switch in the motor area that, if not engaged correctly, can result in your vacuum not running. The ...

...safety switches are engaged. See the instructions here: http://www.goodvac.com/articles.asp?id=137#1.2.1 http://www.goodvac.com/articles.asp?id=143#1.3.1 Good Luck, Rocky make sure the front nozzle ...

...appliance on. I have cleaned all filters and waited for a couple of hours in case it was a thermal safety event but to no avail. Thermal safety switch may be bad and not resetting. There is always a ...