Kirby G4 Bagged Upright Vacuum "burning belt" Questions

burning rubber. That belt broke and now I have replaced it with second belt and the same thing has occurred. The brush does not turn. Just the motor turns on and the belts begins to spoke and then the

the rod that the brush spins around, clean the ends and add some WD40, being sure not to get it on the belt. This should remedy the problem of the belts burning as long as the belt is put on correctly

...Burning On our Ultimate G, belts are lasting about 2 uses and they smell and burn off. I am looking at the roller and I can see a slight grove where the belt rides. Is it time for a new roller. I am ...

belt may be burning like the roller bar is stuck maybe or the belt is stretched and is burning itself off burning rubber smell is the drive belt. there is either a physical binding in the belt housing

...burning smell- 1. The belt is too stretched out and needs to be replaced. This causes it to slip when the vacuum is on and will create that type smell. You can avoid stretching and having to replace ...

belt is burning? when ever I start the vacuum for about 30 seconds I smell something burning. It smells like a rubber burn, such as the belt. I'm trying to fix this but I don't know where the belt is ...

...but smell like a burning belt If it smells like burning rubber, the belt is probably worn and slipping. If it's another burning smell, your motor windings are probably shorting and will burn out ...

I have a kenmore grab n go bagless and I need to know the exact size of the belt, I lost the manual, and I have burn several belts at the bigining of the problem the motor stops and burn the belts I ...

...replace your brushroll seeing that your belt is burning means motor is turning. first check you brushroll and see if there is an obstruction keeping it from spinning if its not spinning freely ...