...replace the motor shaft belt, remove it from the outer pulley and the motor shaft. Put the new belt on the motor shaft and the outer pulley. To replace the beater bar belt, release the motor shaft ...
replace the motor shaft, you certainly may do this. The only problem with this is the motor shaft is not sold by itself as a separate part. The only way to purchase this motor shaft is to purchase the
...replace the belt for the moor. How do I get the replacement belt over the motor shaft? Is there a special tool that will help it over? I don't have the brute strength to pull it behind the shaft. the ...
...off revealing a second spacer at the back . Be sure to replace these spacers in the same order when re-assembling the unit. Secure the shaft hand tight. Post back to advise if you need further ...
...shaft Belt overheated and melted onto shaft need to replace Do not know how to access the area to replace Here is a link to the belts you need and to a manual tou can view: Bissell 1697 Belt and ...
Question about Hoover Vacuums
...replaced the main belt and now it keeps comming off the motor shaft.how do i stop this Need to replace both drive and roller brush belt. Can't just replace one even if the other is fairly
...replace a cam shaft for a Salton Cookie Press model # ckm25. Please notify me as to where this part can be purchased. I'm having the same issue. Lost the shaft to this cookie press and see no way ...
...replace the belt on my dirt devil vaccuum? I opened the bottom up I just dont understand how to get the belt around the small metal rod. That metal rod is probably the motor shaft or pulley. On some ...
...replace housing, when we turn the nut the screw turns with it That nut is a left handed thread, so you need to turn it like you would normally tighten it to actually loosen it. You will also need to ...
Question about Hoover Vacuums
...could be time to replace but this is very unlikely. Rotate the motor shaft by hand and see if there is any wobble, the pulley could be on crooked or bearing has failed causing slop in the motor
733 questions posted
Usually answered in minutes!
381 Questions
223 Questions
207 Questions
187 Questions