water gets sucked into the bottom tank. To clean squeeze trigger to release cleaning solution and slowly push carpet cleaner forward, this equals one wet stroke. Continue to squeeze trigger and slowly
...not collecting dirty water. my recovery tank is not collecting dirty water need answer on how to fix it? Thanks remove tank reajust and push down and clamp hoover carpet cleaner does not pick up ...
water from your carpet,moving your steamer in a back and forth motion. the trigger button is the only button on the machine and is only used to put the water /cleaner located in the upper tank on your
...water is sucked up through by the carpet cleaner. The nozzle notches must fit into the groove on the cleaner correctly and the metal bar need to snap back on top of the removable nozzle, Also ...
...water releases into the carpet, but won't **** it back up when i pull it back. had same problem - carpet soaked with dirty water and very little, if any, cleaning fluid used. Easily remedied. Removed ...
...the dirty water tank and line the front of the tank up onto the carpet washer. Push back until it clicks into
water not getting to cleaner head when pushing down the pedal. Cant find any blockage, motor sounds ok some times the tip /nasal git plugged from soap, it gets crystallized. can try running clean hot ...
...water or carpet shampoo.I fill mine half water half carpet shampoo. then u put it back on ,make sure it either clicks or snaps on.plug in and turn on,they usually have a button that turns that say ...
...dry after repeatedly pushing trigger to dispurse water on carpet. If it will not disperse water then that means that the pump belt needs to be replaced. Here is the belt you need: Proheat pump ...
...water solution to clean carpet. I have a Bissell ProHeat Carpet Cleaner -- but no manual...once I have filled the tank and turned on the machine, what is the procedure to follow for drag and drop? do ...
733 questions posted
Usually answered in minutes!
381 Questions
223 Questions
207 Questions
187 Questions