Kirby Ultimate G Bagged Upright Vacuum "belt not" Questions

Ad

Question about Dirt Devil Vacuums

1 Answer

...NOT IN USE. 2. Use belt lifter. 3. Center and raise the Hand Vac with your left hand as shown. Using your right hand, dip the belt lifter in and hook the belt around the lip of the belt lifter. Slip ...

Ad

Question about Dirt Devil Vacuums

1 Answer

...NOT IN USE. 2. Use belt lifter. 3. Center and raise the Hand Vac with your left hand as shown. Using your right hand, dip the belt lifter in and hook the belt around the lip of the belt lifter. Slip ...

Ad

Question about Kirby Vacuums

1 Answer

belt is not on the motor shaft. Remove the head from the motor unit. With the belt centered on the brushroll, turn the belt lifter a full 3/4 turn counterclockwise to stretch the belt up onto the belt

belt,but it will not stay on Hello there! If you have replaced the belt and it is still slipping off, you may be not have the right belt for your vacuum. This unit takes a flat belt and a v-belt. Make

...not mean it is good. 3) Belt improperly installed. 4) Brush roll not spinning freely. (replace Brush Roll 5) Brush roll is not installed properly. 6) Machine is worn out where it pivots between the ...

Question about Dyson Vacuums

1 Answer

...not sure if it's the belt...anyway to find out how the belt should be installed? Most likely it is the belt. Check to see if the belt is broken or the teeth have worn off. Here is the belt you need ...

Question about Hoover Vacuums

1 Answer

...number? Thanks :) The belt number is 91001028. The belt will be snug but not real tight, so the belt you got may not be the right one. Most repair shops for vacuums should have this belt in

belt is not moved along as it seems to be too big. Nothing else seems loose or moved. HELP!!! Thanks! good job the v belt goes over the small silver wheel pully, not under. it is actually quite simple

belt is not broken. model DC 07; approx three years old The belt may not be broken but after 3 years the belt will have stretched and it will not turn the brush. You should change the belt every year.

...not contacting the belt when you tilt the handle back, It is either jammed and not moving up and down freely or it is broke. Look down below the belt, there should be a small wheel, that has to ...

Not finding what you are looking for?
Kirby Ultimate G Bagged Upright Vacuum Logo

733 questions posted

Ask a Question

Usually answered in minutes!

Top Kirby Vacuums Experts

JoeVacs

Level 2 Expert

445 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Chris Nomland
Chris Nomland

Level 2 Expert

124 Answers

Are you a Kirby Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...