Honda Maxus Pressure Washer MX5222 "change nozzle" Questions

How to widen nozzle spray width? Yesterday the nozzle spray width was twice as large as today. Nozzle was put on in exactly the same way. No amount of turning the nozzle is changing the width of the ...

...change the nozzle? We borrowed this unit and can't figure it out. On most pressure washers the nozzle is inserted into a quick connect. Simply grasp the outside of the housing holding the nozzle and ...

...factory. The only thing the consumer can do is change the spray pattern by changing the nozzle. 0 for pinpoint, 25 for small fan spray pattern, 40 for large fan spray pattern, and Soap for

...will cause you problem. The screw on the regulator has some fine adjustment to allow for slight changes. Any impurities in the water supply will tend to block the nozzle affecting the regulator

...nozzle, if you use the tip that lets soap into the hose, the pressure is very low. Change to a smaller tip and there will be back pressure and it should work as designed, however there may be an ...

Karcher hds 558 nozzle after dripping?.how to stop it .by the way I replace fuel nozzle with same one . Change washers in gun trigger mechanism.

change to a highwe pressure spray nozzle to perform the actual cleaning. If it won't siphon with the low pressure nozzle either, then check for a blockage (old, dried soap) in the suction line tubing.

that it's not quite cleaning the way you want you can always move the nozzle closer to the deck or change the nozzle to the next narrower option(usually the green one) Hope this answers your questions

clogged pressure washer nozzle how to unclog pressure washer nozzle Some of those adjustable nozzles are made with a removable orifice.  If you look close, it is basically a small set-screw with ...

...and will run water comes out of nozzle but when you pull trigger spray from nozzle does not change clean the pressure regulator valve in the pump Have you checked the hydraulic fluid level in