Karcher G 2600 VH Gas Pressure Washer "washers waterproof" Questions

...washers. northstar pressure washer randomly gives pressure. i can pull the trigger and it works, let off then back on and it gives just alittle pressure. Hi: You need to find the bypass (unloader) ...

engine reves up & down under pressure when wand is pressed it won't hold pressure. The engine reves up and down Sounds like the bypass valve is sticking. You need to locate it and grease it with a

when i started the washer and pressed the trigger the first time i had good preasure but when i released the trigger and pressed it again i have no preasure Hi: This sounds like the bypass valve is ...

engine runs, no pressure Hello bsinger: If it is not leaking water anywhere and the nozzle is OK then go HERE Turn it off and shut the water of. Go to pate 2.1 of the manual Carefully remove part #2. ...

clean and unloader valve on Karcher hd3500 pressure washer -intermittent pressure on and off. Cleaned inlet screen. Think unloader valve is is under pressure knob? Will cleaning help? Hi: Cleaning it ...

High pressure cuts in and out I found the valve you mentioned under a round black plastic cover on top of the unit, I took the to #30 torque bolts and removed the valve with a pair on needle nose ...

I have a sticking unloader valve in my Karcher 3050. where is it and how do I fix it? Hello: Here is a schematic. On page 2.1, part #1 is the unloader valve. You need to remove it and lube it with a ...

I have a Karcher HD3500 and was told Imay have a stuck unloader valve. Where is it and is there a diagram showing how to get to and clean? Hi The unloader valveis HERE If you go to D-2 it is part ...

my karcher electric power washer will not start-1800 psi If you have used an extension cord with it you have destroyed the motor. If not, the bypass valve is stuck. On THIS diagram, section 2.1, part ...

WHY buzzing motor in power washer blowing fuses cause This could be because the motor/pump has seized. It is also possible that there has been insulation or waterproofing has broken down. Stop using ...