Karcher G 2600 VH Gas Pressure Washer "milky water" Questions

...Milky-looking oil is a sign of water mixed-in with the oil. This is often a sign of severe engine damage (cracked block, cracked head) in a water-cooled engine. (i.e., one having internal water ...

...from the bottom of the motor. Why is that? The "milky solution" could be oil that's been contaminated with water. You may have a bad seal within the pump, allowing water to mix with the

...Milky coloured substance is usually a mixture of oil and water. I would be checking for a bad pump shaft seal that is allowing water to get from the pump into the engine crankcase. This is something ...

...it, let it run a few minutes..checked oil again...milky white again?? That is the typical color when water is mixing with the oil. Probably a leaking seal or gasket. The washer will need

...gun to get pressure then it stays until let off the gun then no pressure and repeat? milky appearance means water is in the pump oil.......sounds like your spill valve is sticking and needs ...

...milky white in pump it may have a slow water leak inside the pump. change oil and monitor the new oil. if it goes milky the next time you use it then it has a bad leak and the seals will need to be ...

...They recommend 250 hours, but i'd change more often, like you said when it's milky. If it begins to get water in the oil sooner, that indicates your piston to crankcase seal is beginning to

...- Pump oil was milky. Drained, washed out & refilled w/ pump oil. No pressure and spewing water out the soap siphon inlet. thats the water in the oil! it means that gasket dos not hold the

milky engine oil suspect water in oil... just change the oil and see if it returns. it's very rare that a pressure pump can get water into the engine

...water pump oil is milky, this means that the seals have failed between the pump and the transmission. Difficult to check in a G2500. If this is the case the machine has probably been used beyond the ...