kill switch doesn't work, how do i fix it? The switch connects directly to the coil body of the ignition module. You may have to remove the left side cover to expose the ignition module. The switch, ...
Question about Poulan Garden
18": how does this module work, what is the circutry ?"... How does this module work what is the circutry ?" If you are speaking of the ignition module, the flywheel magnets induce a high voltage from
what is the gap setting for the ignition coil i rebult the engine but i cant find out what the gap setting is. Any help will be a big help. 0.3 mm (.012 inch)
18 in. chain saw 235, e series. Try a new condenser. They are very cheap and can freeze which shorts it out inside so the magneto energy is not absorbed and ready for when the points fire. It only has
No spark from spark plug I have a Poulan pro 4218 that has only a few hours on it. Ran fine yesterday. Today will not start. Checked the spark plug... No spark. Replaced the spark plug... still no ...
chainsaw wont start there isnt any spark when operated against the cylinder head the ignition coil may be bad or a short from the wires connecting to the ignition coil.
When replacing the ignition module, what is the proper gap setting between the ignition module plates and the magnets in the rotor? The air gap should be 0.3mm
no spark from spark plug engine not starting. ignition is on but no ignition when crank is pulled. my jonsered 2041 was like that and I replaced the coil with a new one worked fine after that
spark advance of a 530-039198 Is there a schematic available of the ignition module? None that I know of as these ignition coil components are encased in expoy and contain no serviceable parts.
I replaceed spark plug,and still on spark. Whats next? (poulan 4218) chainsaw Remove the flywheel side cover to expose the flywheel and ignition module. Check the flywheel magnets to ignition module ...
708 questions posted
Usually answered in minutes!
457 Questions
255 Questions
170 Questions