Question about Craftsman Tools & Hardware - Others
...not i have a rotary tool single speed chuck does not spin Common issue with these, the plastic flex coupling is broken- Replacement available for $2.57 from http://www.searspartsdirect.com Number: ...
Dremel 395 Type 2 I have a Dremel 395 type 2 and need a nylon coupling from the motor to the spindle (internal splines at both ends of a plastic tube). Where can I buy one? I have a Dremel 395 type 3 ...
Question about Dremel Tools & Hardware - Others
...works fine but the shaft doesn't turn. Here's the email from I got from Dremel (in my case the flex coupling broke): Inside the tool is a flex coupling and spline driver. The flex coupling is # ...
coupling broke The plastic coupling that couples the motor shaft to the rotating shaft broke into several pieces. Is a replacement available or should I try a piece of hose? I have a Dremel 395 Type 3
PLASTIC GEAR INSIDE THAT CONNECTS SHAFT TO MOTER SHAFT DISINTEGRATED I found a coupling part at ereplacementparts.com and the part number is 2615294309, but I would recommend calling Dremel direct at ...
Question about Dremel Tools & Hardware - Others
The blade assembly on my dremel will not come off. Is there a trick to this?The coupling seems to stuck. Try some W-D40 and gentle hits on the coupling to liberate the chuck 3 pin holders.If you got ...
...down and tried again and the tool would not start. Any idea what the problem could be. it is the coupling inside of it called a flex coupling and it seem s like it is made of wax or something. ...
Question about Ingersoll Rand Tools & Hardware - Others
...and the motor spins clockwise then the compressor will spin anti-clockwise as it is viewed from the coupling end. If it is belt driven then it will be the same direction as the motor. Look for an ...
Question about Dremel Tools & Hardware - Others
was discontinued many years ago. Limited parts are available from Dremel. Inside the tool is a flex coupling and spline driver. The flex coupling is # 2615294309 and the price is about $ 1.25. This is
...the shaft there is too much pressure. Make sure the shafts are free of any debris from the original coupling, also check the bearings for wear or being so tight that they twist the coupling. ...
11 questions posted
Usually answered in minutes!
2 Questions
1 Questions