jets not working in my ten year old jacuzzi bath Open pannel and look for a reset button on or near the pump motor.. Or it is posible that the pump motor is shot.. Have a great day !
...whirlpool bath will not operate. Could the motor have burned out? Tripping the reset switch did not help. pretty much bet on the fact that the pump has burned out. You are very lucky it did not set ...
...reset buttons on Bath Pumps. They do have a thermal overload switch in the motor so it will shut off before it burns up. that is thermal so when it cools down it will let the motor come on again but ...
...whirlpool started on its own with no water in it. We turned it off with the switch and it hasn't happened again. Is there a danger of it starting a fire if we are away from home and it does it again? ...
Whirlpool pump. Hope you figure it out. T. Wood CFE Plumbing ok it could be about 3 things the air tubing id disconnected from the back of the air button .the pump motor is defective or the g. f. c. i
...whirlpool Bath Pump TDA150 has stopped working. is there a way to restart or is there anything I can do to fix it. Thanks Kathy It should be ran through a GFI plug like your bathroom plugs with a ...
Question about American Standard Home
...off circuit breaker. (4) The heater circuit will automatically reset in less than 15 minutes. (5) Restore power to the heater. (6) Whirlpool bath is now ready to use. Good Luck, Wayne ...
...switch not via a GFI and the motor does not turn on. Does the unit have a reset button? There are no reset buttons on bath pumps. It may be the motor is bad or the toggle switch is bad. US Parts ...
my pump will not start. checked and have power to the motor. Is there a reset on this unit how do you turn the tub on/off ?
Where is reset button on amiga There are no reset buttons on bath pumps. If the pump overheats it will shut down on its own and when it cools down it will come back on. US Parts Center
49 questions posted
Usually answered in minutes!
88 Questions
58 Questions
