Cuisinart DCC490SA Coffee Maker "auto brew" Questions

...when keep warm cycle ends. NOTE: To reactivate the auto-on feature to start brew cycle at the same time another day, simply lift and release the FLIP SWITCH. The green ?auto-on? light will

auto-off" time you've programmed in. The only work-around I've found is to switch it to "Brew" and cycle the power switch off and on every time you pour a cup. That will start a new 4-hour timer cycle

...Auto Off? position. Press and hold the ?Hour? button for 2 seconds. The clock display will start blinking. 2. Program the coffeemaker to shut off from zero to four hours after brew cycle is finished ...

Auto-Off - change the time from "2:00" to "4:00", and then brew another pot. Immediately after the brewing is done, set the coffeemaker back to Auto-Off and see if your problem is resolved. If not, it

...auto start on my coffee maker stopped working. I set it as always, the green light goes on, but when I check in the morning, there is no green light and the machine has not brewed the coffee. I can ...

...auto brew Shuts off in the middle of a brew or loses its auto brew feature for the past week.That was before last night, then I went and put in more water than I should have..poured out the back some ...

...brew finished. From the Cuisinart website, the owners manual has this instruction to adjust how long the warming plate stays on: "4. To program the Variable Auto Off: Turn the function knob to the ...

...brew mode. I can select the time for it to Auto start, but That is all.. I "think" it is a bad switch, but B/4 tossing this unit; thought I should check with someone smarter than I. It looks like ...

...brew even when on auto timed mode - is there something wrong with the switch or is it something else? Try unpluging for a few minutes . If that doesnt work try moving to a diffrent outlet . If that ...

...auto off, then when the numbers are blinking hit the hour button until you get the desired hours you want the heating element to stay on. Then when you stop hitting it it will remain at that time ...