Cuisinart CBT-500 SmartPower Premier Work Top Blender "blender motor problems" Questions

Ad

...blender however the part where the cup blades conect to the motor is made of plastic.  So what has happened here is that the motor is fine, the cup is fine only the plastic part that makes the ...

Ad

...blender with the flashing lights then you will need to remove the motor base cover and check the motor for a circuit. If it is open circuit then either replace the motor or locate the thermal fuse ...

Ad

Question about Westinghouse Blenders

1 Answer

...the windings were open. So basically the motor is shot...unless you can find a part number for motor replacement or if your's is still under a warranty...it might just be easier to buy a new

...blender lights turn on but the motor does not seem to turn. I had the exact same problem with my Cuisinart bfp-703ch blender. When I plug it in, the lights come on but the motor wouldn't run. ...

...removed. 5 Insert the new coupler over the blender's motor blade and then twist the coupler counter-clockwise until it is tightly fastened. Quick Connect ...

Question about Kenmore Blenders

2 Answers

...motor found on the base of the blender. This gear usually get worn out specially if the load that we are giving to the blender is beyond its limit. I hope you could by a spare on one of the electric ...

Question about Sunbeam Blenders

1 Answer

blender (motor) doesn't operate when I fix the lid/container. I don't believe, I misused it by over heating or putting in water. I think, the motor is the problem. I will appreicate if you can provide

...blender would just burn up a motor in a puff of smoke .a vitamix dies this way . in the end its the same you will need a motor I will also check the blade bearings,if the blades does not turn easily ...

Blender is empty, I've check to see that it is assembled correctly and the black coupling on base is not worn. Any ideas if this sounds like a simple fix or a major motor problem. Worth fixing or time

Question about Westinghouse Blenders

2 Answers

...blender Do you hear it hum when you try to turn it on? If yes, remove the cup. Try again... if the motor runs, try moving the blade by hand. If it is seized, remove it and clean it to free it again. ...

Not finding what you are looking for?
Cuisinart CBT-500 SmartPower Premier Work Top Blender Logo

42 questions posted

Ask a Question

Usually answered in minutes!

Top Cuisinart Blenders Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Peter Schmidt
Peter Schmidt

Level 3 Expert

342 Answers

RAJA NADEEM AKHTER
RAJA NADEEM AKHTER

Level 2 Expert

247 Answers

Are you a Cuisinart Blender Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...