How to separate coupler How to separate the coupling plastic part from the motor unit. Assemble it with motor secure and base & feet on. Drill 3 or 4mm hole in edge of coupling Put screwdriver ...
...blender on, it runs for only a few seconds, then stops and all the lights on the panel flash on and off. More often than not it will need the motor to be replaced, only Kitchen Aid parts will do, ...
...remove bottle and blade assembly; and press the two small black micro-switches inside the base of the blender. If your blender still won't turn on then you may have a faulty motor or motor
...blender motor loud hum not working when turned on motor makes a loud humming noise, red light blinks, blender works, with that loud humming noise, no green lights, shuts itself off after a minute or ...
...blender motor starts but the blades don't turn the motor comes on but the blades won't turn As stated earlier it could be the shaft needs lubing, remove the bottom part of the blender ...
Question about Wolfgang Puck Blenders
...blender however the part where the cup blades conect to the motor is made of plastic. So what has happened here is that the motor is fine, the cup is fine only the plastic part that makes the ...
Question about Back to Basics Blenders
motor or the blade assembly. If you put the blender on low without the cannister on top touch the gear on top of the unit and see if the gear slips or stops. Use a pencil or something..Not your finger
...blender come on but the motor just stopped working Using your blade holder, turn the motor from the blade end. 1 or two turns. Tak the blade holder out, Plug in an test Sometimes the brushes in the ...
...Blender has power but won"t turn on Hello and Welcome to FixYa! Well the mal-function can be due to numerous reasons. You need to choke out each possibility one by one. Loose Connections ( Check ...
Blender died ...... motor won't turn on Using the Kitchenaid blender (model KSB85) and the motor just turned off. Now power to the unit won't even come on. I'm pretty handy, can I replace motor? Have ...
58 questions posted
Usually answered in minutes!
13 Questions
4 Questions
25 Questions