Question about Coleman Electrical Supplies
the capacitor for good measure. It is putting out about 1.5 volts at the receptacles. I flashed the excitor circuit at the brushes the way that the manual told me to do it. I had a light plugged in to
...that. I do show about 1.35 volts on meter at 110 plug in and on 220 plug . Thanks Alec To flash the excitor circuit on a coleman ( the generator is built by generac) you need a 12 volt battery. You ...
...is supposed to come out, you would erase the magnetic field in the armature. You have to get to the excitor winding where you will find a bridged rectifier and apply voltage in that polarity to bring ...
...runs that little bit of maentism will start the output, which in turn is the same that produces the excitor voltage making the armature magnet more powerful and is regulated. If you were to ...
Question about Coleman Electrical Supplies
...for thanks MIKE If you are getting some power, even if it only 2vac then you may have to flash the excitor circuit. If nothing then take the end cap off the generator and clip your meter to the
...advices and a guide to fix it sincerly a desperate man JULIO can you tell me if your model has a excitor capacitor or a avr unit on it has it been sitiing around a while ? it may not have any ...
Question about Coleman Electrical Supplies
...the 120 vac outlet and have low or no voltage, you may have no resistance in your rotor slip rings, excitor & main windings also need a resistance check. 12.6-16.7 ohms (rotor) 2.26-2.80 ohms ...
73 questions posted
Usually answered in minutes!
549 Questions
64 Questions
57 Questions
