...Cutter blows air and stops when trigger is pulled no pilot arc or any cutting when trig is released air flows again and stop after 10 sec new tips was working the day before just once free advice ...
...cutter wont cut steady It begins to cut but it just stops and then u have to let off the trigger and start again. It only cuts for like 30 seconds. I have checked the ground numerous times and its ...
...flow of air into the machine. Check your air compressor you will need at least 6 cubic feet per minute (360 cubic feet per hour) and a 90 psi of pressure. Since there is no way to check the flow ...
...air flow...But when you hit the trigger, the air stops and eventhough the ready light is on it will not arc. I have swapped the hose, and gun three times, checked the ground. This is relative to 3 ...
...for manual for my mytech super 160 welder ..carnt seem to get the plasma cutter to work ..no air flow ...help When you press the torch trigger what sound/sounds do you hear from within the
...air flow and pressure, no mspark no fire check groun dconnection on workpiece and where connected to machine>> check reset switch.> There is a screw in fuse on the back make shure you unplug the ...
air flow and fan indicate this). I am cutting muffler pipe, BTW, so it's not that I am taxing the system. any ideas? Possibly an internal short in the torch tip... the expendable components failing in
problems with Lincoln LINCOLN ELECTRIC K1756-1 PRO-CUT 25 PLASMA: all settings ok, air ok will spark on occassion and then nothing. tried everything put will only lit very seldom and then nothing.????
lotos 520d plasma part not working, arc works great hooked everything up and welding is great although i have not tried the tig but plasma just blows air and nothing else check ur ground Be sure you ...
...air flow or pressure problem. Do you have enough pressure? you will need at least 120 psi at the compressor and 75psi at the plasma machine. Do you have enough flow? You will need 20 SCFH and a 30 ...
6 questions posted
Usually answered in minutes!
5 Questions
4 Questions
