DeLonghi DE500 Dehumidifier "shuts compressor turns" Questions

...compressor quickly shuts off and begins to rattle the entire unit. The fan remains running for a short while and then that too shuts off. I have checked to see if anything is rubbing against the fan ...

...compressor still on. Sounds like it is a bad fan or bearings. Try shutting off the unit as soon as the fan shuts off and see if the fan turns freely. If not, the fan bearings need lubrication or ...

...shuts off one it reaches the programmed level. But the fan doesn't shut off. Depending on which mode you have the unit set on, will determine if it shots OFF entirely or the fan continues to run. ...

...compressor (I'm guessing) tries to run, it instead makes a buzzing sound and shuts down, leaving only the fan running. This buzzing sound repeats every few seconds; any ideas? sounds like the ...

compressor comes on for a second then shuts off Good Morning Friend, I understand that the compressor on your Frigidaire dehumidifier, model# FAD504TDD, comes on for a second and then shuts off. First

...compressor runs for less than a minute and then it shuts off, and only the fans continues to run. Can someone explain why this is happening and how it can be fixed? Thank you. If your machine is ...

...compressor runs and shuts off but the fan just runs on high and low. I have 3 other dehumidifiers that the fan runs only when the compressor runs...why doesnt the friedrich fan shut off? Depending on ...

...shuts off. It seems to work fine accept for that. It has brought the humidity level in my basement down below 40% according to the digital meter readout. Even when it registers below the 40% humidity ...

...shuts down, unit is very hot. Oh.. fan turns freely. Something, pump seezed? help please. Robinson, it really sounds like the compressor is overheating. This may be caused by a low refrigerant gas in ...

AD40DSL1 Whirpool dehumidifier that will not shut off until bucket is full. The switch is turned to OFF position. SWITCH is in OFF position. It sounds like the compressor contactor is welded shut so ...