...back in i took apart the lock and the deadbolt is still in the lock position and will not come out hello there: you will need to dissasemble the deadbolt there is a plastic piece that wears out over ...
Question about Schlage Measuring Tools & Sensors
...deadbolt installed about a month ago. The key will not turn the lock from inside but will from outside. Any suggestions? my guess is that during installation the inside lock cylinders were 1/2 or a ...
Question about Schlage Measuring Tools & Sensors
...back thinking I could get the bolt out by pulling it out. However, its not moving. Is something holding it up or should I supply more force. The bolt may be bound against the side of the frame plate. ...
Question about Schlage Measuring Tools & Sensors
...back in side of door first then put lock side that has long rod sticking tru line up screw holes with holes in plunger then line up other side of lock and then put in screws tighten screws snug not ...
...lock - key will not turn both inside and outside and door is locked. inside, it is at 11:00 o'clock. Hello. get a can of a penetrating lubricant called WD-40. Squirt a little into both key holes and ...
Question about Schlage Measuring Tools & Sensors
...lock-ez and see if that will work. If you decide to take them off when you put them back together be sure to do it so that both tumblers are in the same position or you could make it so the lock ...
Question about Schlage Measuring Tools & Sensors
...deadbolt back has disengaged... if you undo the screws from the inside of the door and remove the manual knob there will be 2 more screws holding the key lock to the door. A thin flat bar is attached ...
...all screws on lock to a firm tightness. DO NOT OVER TIGHTEN as to bend the lock casing! Snug only. Use powered graphite to inject into lock and add to key working it back and forth into the
...deadbolt. Try using a screwdriver to pull it back. You may in the end have to break the unit in order to get it out and replace it. I have the same thing happen with a deadbolt. I ended up having to ...
41 questions posted
Usually answered in minutes!
12 Questions
4 Questions