Black & Decker BDL400S Bullseye Crosshair 90 Degree Auto Leveling Interior Line Laser "replace battery 4" Questions

...battery 4 v, 2 batteries 8 v. Depending on the system it maybe either ac or dc. Try both with your volt metter. Amazon seems to have the least expensive replacements. Search for Black & Decker ...

...Replace the battery cap. " But there no Latch!!! Hold the tester in your hand and you will see the on/off switch at the end of the tester. Make certain that the tester is turned to "off" and just ...

...Thanks, Geoff. never charge batteries that long usually only 3to5 hours if ni-cd . most batteries last 3 or 4 years . totally discharge pack and try to charge again . if nothing buy new battery ...

...I still had some juice left with the battery - 24 volt cordless - when I charged it. have already replaced charger once due to some B and D fault. worked fine the first time. had noted the charger ...

...battery compartment, if the contacts are still silver colored. If contacts are blackened or green, then use CLR. If that doesn't work take the 4 screws out of the bottom carefully remove the bottom. ...

4 screws) and cleaned the corrosion off of the battery contacts on the slider switch and the two plates that the switch sliders make contact with. I also bent the two thin slider contacts so that they

...4) Remove a 1.5mm allen head jam screw from the prism head, and carefully slide the prism off the shaft (gently prying up with a screwdriver) 5) With retaining ring pliers, remove the retaining ring. ...

...battery post, MAKING SURE NOT TO TOUCH THE POSITIVE POST OR CABLE.to check for kickout and spin. Hopefully these things will solve your problem, if not you may be looking at in internal engine ...

...battery terminal. 2. Remove the fuel rail retaining bolts and the injectors will pull out of their seat in the head. 3. Remove the injector plug and simply pull them out. Look into the input side and ...