Proform 380 CS Treadmill ! "switch vs 4" Questions

...switch.attache the diagram3) Tight the flexible cable from keypanel vs display board.4)Tight the connector from display board vs lower board. 5) Test+5Vdc coming from power supply , see if there are ...

...vs display board .4) Tight the connector from display board vs main controller board.5) Adjust the Reed switch +speed sensor(touch the magnet with another face in the motor).See the block

...switch first.2) change the batteries if have it.3)tight the flexible cable vs display board.4) tight the connector from display board vs lower board.If the problem persist.you must test the ...

...vs lower board(Main motor board)4)Adjust the reed sensor switch by 1/8" or 3mmsSee the diagram attached.5)Measure input voltage for 115 Vac to input of main motor board6) Measure input for power ...

...switch, clean, and tight the wires connector very well. 2) Tight the ribbon cables from keypads  3) Tight the connector from display board vs lower board.4( Change the batteries, and clean ...

...switch see the diagram attached, tight any wires connector from display board vs lower board 2) tight the ribbon cables from keypads and clean.3) test for fuse for open and replace.4) see the power ...

...vs lower board.4) Adjust the sensor reed switch see the diagram  by 1/8"5)put your software calibration to work, for diagnostic and adjust.see the instruction in your owner manual y/o under ...

...vs lower board. 5) attached the sensor reed switch by 1/8" or 3 mms adjusted according. 6) Test the main motor controller board for 115 Vca, and then +5 vdc for output coming to display board very ...

...SWITCH BY 1/8" SEE THE DIAGRAM2) IF YOUR SISTEM HAS BATTERIES EXCHANGE BY NEW ONES.3)TIGHT THE FLEXIBLE CABLE FROM THE KEYPANEL VS DISPLAY BOARD AND THEN TIGHT THE CONNECTOR FROM THE DISPLAY BOARD VS ...

...switch, see the diagram by 1/8" or 3mms.3) Tight the flexible cord from keypanel vs Display board + then tight the connector from Display board vs Lower Board( Main Motor Controller Board)4) Adjust ...