Life Fitness 9500HR Next Generation Remanufactured Treadmill "plug power cord" Questions

power cord is plugged into a surge suppressor, and that the surge suppressor is plugged into a properly grounded outlet . Use only a single-outlet surge suppressor that meets all of the specifications

...plug in the power cord next locate the reset/off circuit breaker on the treadmill frame near the power cord. Switch the circuit breaker to the reset position. Then place safety key on console and the ...

power cord connects to the underside of the treadmill, there is a clip with a screw , sometimes this get loose and the cord slips down just enough to lose contact push the cord back up and tighten the

Plug in the power cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt is centered. If the walking belt has shifted to the right, first remove the key and UNPLUG

will not turn on . there is power up to the end of the power cord. replace the power cord as ther appears to be a broken wire in the plug

...Plug in the power cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt is centred. b. If the walking belt has shifted to the right, first remove the key and ...

no power on console check the power supply where you plug it up it could have been pulled out an helpd tore the cord in the inside of the cord.hope that

...power cord is plugged into a surge suppressor, and that the surge suppressor is plugged into a properly grounded outlet . Use only a single-outlet surge suppressor that is UL 1449 listed as a ...

...out how to turn it off when I am not using it. Plug in the power cord. Next, locate the reset/off circuit breaker on the treadmill frame near the power cord. Switch the circuit breaker to the ...

...power cord is plugged into a surge suppressor, and that the surge suppressor is plugged into a properly grounded outlet (see page 9). Use only a single-outlet surge suppressor that meets all of the ...