Life Fitness 9500HR Next Generation Remanufactured Treadmill "not working" Questions

...not working. Most control function not working. I had the same problem-only one of my programs would work, and the rest of the buttons (even start) would not work. I used some scissors and carefully ...

...not working or is it because it is for a treadmill and not the incline trainer? Thanks. Dawn Technically, the Incline Trainer and the treadmill are two different type of machines. The incline trainer ...

I bought a used Cybex Trotter 700 T treadmill that works fine except the increase speed (+) does not work. I tried to fix it and now all of the buttons don't work. Any sugestions? I bought a used ...

has not done up to 4 hours of work. When I start it, it jolts a little but will not run. The con soul works fine but motor will not run. I purchased and replaced the controller. Now it is working fine

NordicTrack Treadmill A2050, Will not work or turn on. With key in place on Treadmill A2050 NordicTrack, it will not turn on and makes no sound? Will not run, at all. 1) test the outlet wall , put a ...

...not move the treadmill , etc. Do you have the iFit component on your treadmill? We had a similar issue and I unplugged the iFit component (requires opening the console and unplugging the ribbon cable ...

incline does not work but incline motor runs for 3 to5 seconds proform415ct Incline motor runs a few seconds then shuts off incline does not move everything else works if the motor tries to work but ...

treadmill is stuck in down position; fold does not work; tried to re-calibrate as when i do when it is stuck in upright position - does not work. tried plug and un-plug still does not work. I read on ...

display on ZR3 does not work The display does not work after sitting around for a few weeks, we put in new batteries and it does not work Dear Sir:Please adjust the reed switch. 2) Tight the ribbon ...

...did not work.  in march 10 they sent a whole brand new treadmill, and when i got on it last week the console was not working once again!!!!!!!!!!!!! i hope you dont have as many problems as i ...