Precor EFX 546i Elliptical Version 4 "trainer 5" Questions

kettler elyx 5 not working LCD display not turning on, no beeping noise. Check batteries.

the crossramp and resistance buttons do not work on a precor efx 5.23 I can not change the resistance or the cross ramp but all the other buttons work Replacement Parts for Fitness Exercise Equipment ...

precor elliptical stuck key, display won't stay on, cycles on and off every 5 seconds, but won't continue If you have a stuck key error, you need to replace the keypad. It will not work otherwise.

my precor 517.1 elliptical does not turn on I would start the troubleshooting process by confirming power at the wall outlet. If this checks out, follow power from the wall to the end of the cord. If ...

Precor EFX 5.23 Crossramp controls don't work The controls for the Crossramp and the resistance don't work Replacement Parts for Fitness Exercise Equipment at SPORTSMITH This could be a simple

where is the battery located on a precor epx546i where is the battery located Depends on the version - the serial number would help, not sure which one version 4 would be, but I would guess it would ...

I have a Precor EFX544, old, that won't display times correctly, counts down to 5 seconds then quits, any suggestions. When I do diagnostics, I get what I think reads Life 109? In diagnostic mode you ...

I own a precor EFX 5.21i, I recently began to get a error 40 message. I was told by precor it could be a blown fuse or bad lift motor. Where do I locate the fuse? [email protected] Please verify ...

While using the elliptical there is a persistent knocking noice in the fly wheel area with each rotation. It seems to be at the bottom of the rotation. How do I fix it? I just fixed the problem on my ...