can the model # LTF2140FS1 be stacked with a matching dryer? yes, i had mine stacked, you have to buy a kit to secure them together. i bought mine at lowes. justin
Question about Frigidaire Washing Machines
REPLACE WATER INLET VALVE ON FRIGIDAIRE LTF2140FS1 Valve body cracked during the cold winter. I need to replace it. Almost there except I can't reach the lower screw to remove the valve assembly from ...
Question about Frigidaire Washing Machines
Frigidaire front load washer model LTF2140FS1 hums when pressing start, nothing happens. Unplugged few hours. unlocked & locked & it started. Still humming noise. What are the possible problems? Water
...starts then stops and goes to no spin. replaced door switch and control board.Front load model ltf2140fs1. Hello friend, thank you for your post! It sounds like you have replaced multiple parts ...
model LTF2140FS1 washer: last load did not finish, water still inside, try to turn on machine and it makes a loud buzzing noise and nothing else. Hi rrudrow, Drain pump may be clogged. Please follow ...
Question about Electrolux Washing Machines
...the sensors could be covered with soap buildup. Where are the located on the Frigidair model # LTF2140FS1? Only 1 1/2 yr old. sounds more like a bad electronic
front load washer- spin cycle is like a hurricane I have a new LTF2140FS1 front load washer. The first time I used it it went crazy during the spin cycle and moved across the floor while making ...
Question about Frigidaire Washing Machines
HOW DO YOU REMOVE AND REPLACE WATER INLET VALVE ON FRIGIDAIRE LTF2140FS1 remove the screws holding the top panel on, they are located on the back at the top. Standing at the front of the washer, push ...
Frigidaire Front Load Washer Model LTF2140FS1. Put clothes in washer, fill detergent dispenser, close it, shut the door, set my cycle hit start then the door lock clicks, clicks again, panel shuts off
35 questions posted
Usually answered in minutes!
311 Questions
96 Questions
40 Questions
25 Questions
13 Questions