Electrolux EOB5610 Ultrafan Electric Single Oven "heating element hot red" Questions

...heating of the element. Heavily oxidized or loose terminals should either be cleaned up or replaced. Since you say both elements have the problem, I would start first with the input power connection. ...

...set to broil. if it does then try the bake again. if you get no red hot heat from the bake element then you may need to replace it. when an element is working properly it will heat to a red hot

...heating element in each oven is red and within a few degrees of the set temperature (450). There is a ton of clicking (turning the elements on and off). The bottom element in both ovens is around 100 ...

heating element ive replaced the lower heating element in my amana range and my oven still will not get red hot or heat beyond 250 degerees it could either be a hot spot in the element where it can no

...heating element inside the oven supposed to get hot even if not set on broil? Yes the top element does get hot even on bake but it does not get red hot just hot. It will get hot enough to burn you so ...

...heating element does not turn red hot in broil mode. I moved into a home that has a Bosch HBL546 oven. The cooling fan stays on continuously. Dry air is vented out front even in non-convection mode. ...

...heating element in the range does not get hot (is not red hot as the lower one). WE replaced it with a new one but not much difference in heat as the old one. What is the problem? The burner switch ...

...HEATING ELEMENT WHICH IS ROUND AND ON THE INTERIOR SIDE GOT VERY HOT AND GLOWED VERY RED WE HAVE NOT EVER NOTICED THE RED BEFORE. DO WE HAVE A PROBLEM OR IS THIS NORMAL? NEED YOUR HELP THANKS ,REGENA ...

...element getting hot?when you put the oven on bake both the broil and bake elements come on,if just the broil element is getting hot it might take it an hour to heat up.you might just have a bad bake ...

...heating element glowing bright red funny smell less than 5 years old double oven problem in the bottom oven I make sure the fan is working o/k, because if it is not, then the element will get bright ...