Electrolux UltraLux 2000 Bagged Canister Vacuum "plastic end hose" Questions

Ad

...plastic end piece for the hose but can't get the old one off the hose to change it??? Soak the end of the hose it very hot water to soften the end of the hose. Then insert a screwdiver inside the ...

Ad

plastic "bayonet" section on the end of the hose will pull out of the plastic housing that attaches to the vacuum. Don't pull on the corrugated hose section or you will ruin the whole assembly. I took

Ad

...end and screw it in using an un do direction if it is the plastic fitting itself that is broken then weld the broken section back together Basically use a soldering iron and heat the sections until ...

...and narrow and it worked perfectly! I pushed it through one end and started feeling resistance, and kept on shoving and when the hose reached the other end, it was pushing out the plastic bag.

...plastic end fitted to the flexible hose my flexi hose has split about one inch from the plastic end fitting that slides along the metal tube. it must be possible to remove from the flexi, cut off a ...

Question about Miele Vacuums

1 Answer

...plastic thing on the end to remove the clog If you can safely remove the whole hose the best way is with compressed air or I sometimes use a long flexible wire to pull it out. The hard plastic on the ...

Question about Kirby Vacuums

1 Answer

...submerge the end of the hose into hot water (not to hot to touch) so the vinyl becomes soft and you can bend it in with finger bringing plastic end over the lip on the molded end of the hose. Good ...

Question about Dyson Vacuums

1 Answer

...The hose can be dismantled from the plastic fittings at each end but has not been designed for the user to do so: the hose and fittings are bought as an assembly (not expensive at about

...end off and re-attatch (but its very fiddly and a real pain). You need to simultaneously push in the small oval pins on the side of the hard plastic part and pull the hose out. Be aware that there is ...

Question about Kirby Vacuums

1 Answer

...hose and the coupling in hot water and once the plastic is warmed up you twist the coupling off the end of the hose. PLEASE NOTE - do not use boiling water you will cause the hose to melt - just

Not finding what you are looking for?
Electrolux UltraLux 2000 Bagged Canister Vacuum Logo

222 questions posted

Ask a Question

Usually answered in minutes!

Top Electrolux Vacuums Experts

eVacuumStore.com

Level 2 Expert

47 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Kolbrun...

Level 3 Expert

1228 Answers

Are you an Electrolux Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...