...HEPA filter get's blown off of the vacuum when I vacuum. I just got all new filters and a new brush roll. Could something be clogging in the inside? There should be a cover that closes over the HEPA ...
Question about Rainbow Vacuums
...HEPA filter in the unit. The other filter is a motor filter kind of like a car air filter. The motor filter is designed to catch the dust coming from the motor brushes. The HEPA filter is designed to ...
Question about Electrolux Vacuums
...HEPA FILTER LIGHT FLASHING & NEW FILTERS INSTALLED I have replaced hepa filters & still the sensors are registering that they are dirty have blown out & clean any area of the vacuum I can ...
Question about Filter Vacuums
...hepa filter and tried as best I could, to clean fillter over the motor That cover the main motor.It runs 10 min. and shuts off for at least an hour only using the dry hose. Any suggestions? sounds ...
HEPA filter (and any prefilter, if applicable) and gently clean it so as not to damage the filter media. If this does not help, please resubmit your request with a model number. Good luck from Detroit
...hepa filter on side of product was blown off. I checked the belt, and was in tact but has a few cracks. Hello, I don't belive it is the filters, the motor sounds like it is bad, whihc will be happen ...
why does my dyson slim dc18 keep shutting down, even though i keep it clean. Filters area is clean and all others have been properly blown out with air from a air compressor. It will work for about ...
...hepa filter is ruined due to having sucked up what you did and gotten some on the filter. Each time you turn on the machine hot air is blown through it and can smell very foul. I had gotten mine wet ...
The vacuum won't turn on. We've tried multiple outlets with the same problem. We've cleaned the filters, which caused it to turn on once, but a week later the problem occurred again. HELP! I have this
hepa filter from mounting works fine at low suction - but turn the suction up and the hepa filter is blown out of it's mountings. It seems to be clicked in ok but still gets blown out of mounting.
102 questions posted
Usually answered in minutes!
184 Questions
178 Questions
164 Questions
89 Questions
69 Questions
