Electrolux Lux 7000 Bagged Canister Vacuum "fix machine cord" Questions

...reel back up which will slowly wind the cord back up on the cordwinder. This usually cause the cord to wind back up. If that does not work, then the only option is to take the machine apart to fix

...machine over and pulled out the hair that was wrapped around the roller. However, that did not fix the problem. I should probably backtrack a little bit. In the past, I have had problems with the ...

cord and knocked the machine down. Ever since then, the machine will not work. I believe the motor went out. HELP!!! Sears should have parts and repairs available for you. Contact them on the phone or

...machine apart to fix this problem? You shouldn't have to. Simply tilt the machine to 45 degree angle and gently tug and release the cord. From my own experience, this almost always works. It's ...

...fix it? Also is it possible to order parts for this vacuum online? Thanks for any help you can give me. TerryS I had a problem with my K1 Komfort model which sounds similar to this. I initially ...

...machine. Cut the cord off the unit about 2 inches from the handle. Open up the handle and follow where the cord goes to, and disconnect the cord from the switch. Both the white and the black will go ...

...fix it or disable it? Hi Not really. It means that the cord has been pulled roughly when its been plugged in and the retracter is getting weaker to hold the cord that has been pulled out. Generally ...

fix this problem? Patty Lester You may have to dis-assemble the machine to the point where you can gain access to the mechanism that retracts the cord. Then see if it can be fixed or needs replacement

...machine. Is there a way to fix the coiling mechanism? I found the solution from another web site. Removed the reel coil, cleaned it of lint, etc. replaced it and it is now working. Thank you for your ...

fix it?I plug in the rug doctor then i flip the switch but it wont go on. I plug in the my rug doctor machin and i hit the switch but it wont start whats wrong? bad switch or broken wire in the cord .