Electrolux Epic 6500 Vacuum "cord rewinder canister" Questions


canister. The power cord is pulled all the way out and will no longer retracted. How do I fix this? try pushing the cord back in whilst depressing the retract button This canister has a dog ear device


Question about Bosch Vacuums

1 Answer

...The power cord reel does not rewind the cord on my Kenmore canister vacuum Model # 116.235.12. sounds like the spring is either over stretched or broken. you may have to have the spring ...


...CANISTER ... I have cleaned the cord & made certain that the cord is not kinked or twistedc you have streched the return spring it needs taking apart and recoiling the wire around i have the same ...

...cord, and then stepped on the canister handle to activate the rewind feature. Now the cord doesn't rewind at all. It's as if the spring is broken. What can I do? Should I give up and send it back? HI ...

Question about Hoover Vacuums

2 Answers

...canister also has the retracting cord stuck. It will neither retract into the housing or pull out for use. What can be done about this 09/08/2008 Returned the sweeper to Costco for a full refund and ...

canister model 116-28712790. How do you remove the button cord rewind bar, to get to the screws below. I figured it out ..by pushing the lever down and pry a screw driver into three different spots on

...cord is all the way out; will not rewind. Can I fix it myself? I took off the dust canister and then the 2 Phillips screws on top of the rewinder. I was searching how to get at the rewinder so I took ...

...you have the panel off there are a couple of screws there that are holding you back. once removed, you should have full access to the underneath with the motor and cord rewinder there. Good luck, ...

Question about Electrolux Vacuums

1 Answer

...cord spool but can't get plastic slides to move even using needle nose pliers. Plse advise. use a screwdriver to pry up one end. there's a little nubbie that snaps into the canister, then its just a ...

Question about Kenmore Vacuums

1 Answer

cord rewind not working' spring is sprung. Take it to a vac store for a new rewinder

Not finding what you are looking for?
Vacuums Logo

319 questions posted

Ask a Question

Usually answered in minutes!

Top Electrolux Vacuums Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1482 Answers

Cindy Wells

Level 3 Expert

6259 Answers

john h

Level 3 Expert

23888 Answers

Are you an Electrolux Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides