Question about Samsung CLP Office Equipment & Supplies
...315 and then stops halfway and flashes paper jam light but nothing seems to be jammed paper ok any ideas This is the problem in the exit sensor of the printer. Please approach authorised service ...
...315 has a problem. The printed paper comes out all smudged. The printer has a brand new black cartridge. The imaging drum has been thoroughly cleaned. The waste toner box is empty. But the problem ...
Question about Samsung CLP Office Equipment & Supplies
315 has a paper jam with about 1/3 of the paper out the exit everytime It sounds like the sensor on the fuser is not working properly, or a possible broken gear on the fuser. I dont believe the sensor
Question about Samsung CLP Office Equipment & Supplies
...315: starts printing, but paper jams every time. It's prints fine on the top half of the page, then gets blurry and will not exit printer. I have to turn off/on to get the page out. I appreciate ...
...315 printer always stops printing the page after a few inches of paper have come out. I open the front door and close it, and then the paper comes out completely, and it tries printing again and then ...
Question about Samsung CLP Office Equipment & Supplies
...paper-jam-samsung-clp-315-a.html This is not the imaging kit. A paper may be stuck in the printer (or a paperclip or staple!) Use the owner's manual to inspect the paper jam areas. look inside the ...
Question about Samsung CLP Office Equipment & Supplies
...printer off after it spits the paper out. Any ideas would greatly be appreciated. Paper exit sensor on the fuser is faulty and is a cheap part to replace!Had the same thing on another m/c!Good
Question about Samsung CLP Office Equipment & Supplies
...paper starts to come out, you need to have the exit sensor replaced. To replace that sensor the side cover and the fuser need to come out, The part number for the sensor is 0604-001393 if you want to ...
Question about Samsung CLP Office Equipment & Supplies
...paper jam' , once turned off ad on is disappers but next print is still jammed halfway Hi, your printer exit sensor is faulty. replace the exit sensor will resolved this issue. Yes, bad exit sensor. ...
145 questions posted
Usually answered in minutes!
951 Questions
374 Questions
221 Questions
108 Questions
74 Questions