Kenmore HE2 Plus Front Load Washer "washing machine 35" Questions

...Washing Machine Our Kenmore Washing Machine stopped and the panel displays F-35 am sorry but F-35 is not in the record. If this is a different F# please e-mail us back I will be more then happy to ...

F35 flashing. What does this mean? F-35: Analog switch/water level failure Location on machine (number 20) w10156252

35 to 20 minutes left in the cycle and I get the F20 error code Error F20 indicates lack of water entering the machine. Read more: http://www.ehow.com/search.html?s=+Kenmore+HE2+Plus+Front+Load+Washer

What does F 35 mean You could find out by removing the bottom panel on your washer and fishing out the "tech sheet". That will give you the fault codes. Plan "B" you could retrieve the model number ...

Hello, I have a Kenmore HE2 Front Load washer, Model 110.46462500. The washer fills with water even when off, and I believe the problem to be the "inlet mixer valve" (which I presume is the ...

have a kenmore elite washer f35 fault code help!!!!!!! washer, kenmore elite fault code 35 help!!!!! Bad pressure switch. It is mounted on the rear right side under the top. It's a cinch to replace. ...

sud error comes on sreen If you are not using HE detergent, you need to be. These washers are designed to use HE detergent which is formulated for wash tubs that use 5 to 7 gallons of water. If you ...

F 35 warning? F35 means that the pressure switch is not detecting the expected value. This usually occurs after SUDS (excess of detergent) or blockage. Replace the pressure switch and clean the drain ...

I'm getting f-35 code and suds, what is that ? This typically indicates slow drain condition. It's not only if the water drained, but how quickly it drained. Check for any clogs or kinks in the drain ...

f 35 message Hi, Just tilt the washer back and prop it up with some wood blocks. Three screws are right on the front at the very bottom. Use a 9/32 socket to remove them. The front cover slides right ...