Kenmore HE2 Plus Front Load Washer "top elite power" Questions

...Elite use another type of door lock and switch assembly but still with the release tab and can be accessed through the washer top. Remove the screws attaching the top panel to the rear of the machine ...

...Elite Front Load washer. F6 pops up and the washer stops. Can't do anything, after a few hours it will finish cycle. This is happening more and more. Hi, The error is an indication aDrive Motor ...

...Elite HE3t washer. Kept getting F11 codes. When I held cancel button nothing happened so I unplugged it. Problem is when I plugged it back in no lights came on nothing. What do I do? I already took ...

PF error code on kenmore elite PF stands for Power Failure. Caused by unplugging and plugging in within 30 seconds, or a short power surge or outage.

...Elite range and it begam flashing a "PO" error message. Can you tell me what this means? Hello, PO means power outage so if ya has a lighting storm or for some reason if the power went out ...

elite he5t washer wont start or light up Take the top cover off with the 3 torque screws. need to check if there is power going to the interface board. If there is then the interface board needs to be

...power. It is the machine not the outlet. I have a Kenmore Elite washing machine. When I plug it in there is either no power or it flashes PF and then has no power. PF just means your house has ...

...Top load Washer stopped in the middle of a cycle. No power and will not unlock error code? totally unresponsive? try reseting power then if unresp. replace main control. verify 120v into board.  ...

...elite oasis washer top loader will not turn on. I unplug the washer and plug it back in and all it does is beep and nothing else happens no lights and the push butten controls do not light up. The ...

Elite top load washer. It doesn't spin or drain anymore. the code fl4 comes up? do you have any suggestions on how i can fix the problem? thank you very much EEPROM Error The Central Condrol Unit (CCU