Kenmore HE2 Plus Front Load Washer "quot spin" Questions

...quot; noise and the spin cycle no longer functions I Don't have much experiance with front loaders but when you said it makes a whirring noise and won't spin leads me to believe that the coupling to ...

...quot; flashes on the screen?? Hello, The F6 error code means that the computer on the control didnt detect that the motor reached a high speed on the spin cycle, sometimes it thinks the washer didnt ...

...spin fast enough. Then I replaced the pump and it did two loads just fine. However, on the third load, I put a couple of towels in there and set the washer on "heavy load" and then it ...

...spin cycle and it does not matter what size load is in the machine. Can I inspect the drum and guide rollers "if any" by removing the front panel? no you cant. to inspect it, remove the top ...

...spin and was making noises below. i called Affordable Repair and they said the control panel had to be replaced for $200 + labor. i said the noise is coming from underneath and it's the control ...

quot; I have unplugged the machine twice, thinking that would reboot the system. No luck at all! Can't run the machine and can't unlock the controls. What do I do? I'm a little frantic! Hi

...quot; there nothing.. I don't hear any water trying to fill it nor does it spin... The door shows that it is locked and all looks well just no water, there's not even any sound of ...

...the system and how it should work. I called Sears about a tech. coming out to repair it and they quoted me $129.00 service call plus parts minimum. I asked them if the people were experiened and ...

...spin cycle and rearrange the load. Then manually hold the lid button and spinn the drum by hand to start it spinning. Light loads do fine. seams like you need to check your belt copy n paste this ; ...

...spin cycle. It spins for about 2 minutes and then the power goes off by itself. Pressing the "On" button and immediately follow by pressing the "Off" button after a minute ...