Kenmore HE2 Plus Front Load Washer "change direction washing" Questions

...washing machine will stop mid cycle and with a full tub of water will change from showing the normal time remaining on the display to SD and then in 5-10 minutes after that the display begins to ...

I have a Kenmore HE2 plus and the eror code is F-24 water temperature sensor error. A tech changed a fuse/sensor last year and I have a new fuse I need to know how to replace it and how do I open the ...

...wont turn on wash or spin If motor turning, belt slip, bearing could be broken. It's not easy to change the bearing, but first try spin the drum, if it can spin freely, then tighten the belt ...

...change the direction the door opens on a Maytag serial # MFW9700SQ1 Unfortunately, you can only change front loading dryer door directions on some models. Washing machines do not allow this. If the ...

...to change direction but wont. Sooner or later the LE error shows up in the screen and the unit stops trying to work. Check for foreign objects lodged in tight places, coins and socks come to

change door opening direction How do I change the opening direction of the door of my Samsung WF8704RSW washing machine? I seriously doubt that can be done.

...when agitating, just it runs backwards therefore keeping the water in the machine. When the motor changes direction, the pump starts taking water out of the tub and at the same time the

direction during wash cycle. Does the same during spin cycle. I changed the motherboard with no improvement. This is normal operation for the machine It is doing this to get detergent and water to all

...I thought that this part was clear. The motor is operating fine. No spin is my current diliema. I changed the clutch and I have new invigorated agitation but no spin cycle in any switch position. ...

Makes a loud ratcheting noise during the wash cycle as the drum changes direction. load size does nt seem to change the sound email; [email protected] bearings ?