Kenmore HE2 Plus Front Load Washer "button machine start washing" Questions

...machine won't start? It will power on and change settings, but it won't start when I press the start button. Hi, Could be the door switch, make sure the door is shutting completly then try to

replacing ccu on kenmore HE 2 front loading washing machine power is on when u hit start button machine door locks but nothing else happens The CCU is number 15 on this diagram.Here is the CCU part.

...of the machine by selecting a cycle and pressing and holding the start button until the machine starts. Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE ...

...WHEN PRESSING START BUTTON POWER TURNS ON, WHEN I HIT START BUTTON POWER CUTS OFF AND MUST HIT POWER BUTTON TO CUT BACK ON, HIT START AND SHUTS BACK DOWN What is the complete model number of the

...button twice to clear the display and cancel the cycle. Unplug the machine and remove the fill hoses from the water inlet valves. Check the inlet screens for clogging and clean it. Make sure that the ...

t drain and it turns off right after I press START. Check your door switch button, its just above the door latch, sometimes that button has broken, or the door has dropped abit, not aligning correctly

...button again watch the machine when the water goes down a certain level.The clothes well start to spin. Now after they get done spinning,push the cancel button.you should be able to hear the door ...

...button on my kenmore washer 11046472501 all the lights around the wash settings blink what does that mean, why won't my washer work? Your door switch is not working, the machine thinks that ...

...front-load washer. All of the lights come on but it will not restart... It seems like it needs a Reset button - is there such a thing? Unplug machine, push reset button locate in the owners ...

...button on machine. Failling that you may need to contact the properly trained techy. I'm not completely framilliar with the HE2 Plus Front Load Washer, I have the HE3T. The front panel should show ...