Fisher and Paykel WL26CW1 Top Load Washer "screen fuse" Questions

...closed. ? This may be a pause or soak period in the cycle. Wait briefly and it may start. ? Check screens on inlet hoses at the faucets for obstructions. Clean screens periodically. If the sreens ...

...fuse blows You will need to order a coor kit it comes with fuses all parts including fuses there was a door switch problem and maytag sent a door kit to replace old parts Great!! That sounds like a ...

...fuse and started the cycle again, when it's finished it keeps saying spinning across the screen so i press cancelled the screen goes back to select programme but the door will not unlock, I turned it ...

...but no heat. I checked the fuses in the electric panel and cleaned out the exhaust vent and lint screen Thermostat bad or heating element. try checking for continuity on the heating element ! ...

screen. how can i do a rest set? already unplug receiver per owens manual. problem started with the circuit breaker in panel was turned off with unit operating and reset. unit is powered threw a power

...screen has gone completely blank, just as if there was no power connection. I've checked the cable and the fuse, drained the water and checked that the pump is OK and it is clear, but I can't get the ...

...remains locked and washer will not start. I have cleaned the pump drain clean-out,the water intake screens and all the hoses. I have also removed and checked all connections. There are 4 common ...

...water supply issue. Check the water inlet valve. Remove the water supply hoses and check the small screens in the water inlet valve. Make sure they are clean and clear of rust or debris. Use a ...

in use and when I turned the power on again the machine in not working so the LCD screen. Please Help. Many thanks and kind regards may be the fuse in the pug, or the internal fuse within the machine.

...fuse. The person that has the same problem is on the right track. There are two solenoids on the water inlets, one for hot and one for cold. Check and see if it works on one but not the other. Then ...