2008 GMC Sierra 1500 "reset abs traction code" Questions

Ad

Question about GMC Sierra 1500

2 Answers

reset computer abs light, traction light and air bag lights are on ? I suggest scanned the PCM and ABS modules to know exactly what fault code is stored there; generrally, when ABS and TRAC warning ...

Ad

Question about GMC Sierra 1500

2 Answers

...reset the ECM by removing the hot and ground cables, wait about 15 minutes and then replace them, may fix the problem, may only temporarily fix the problem if the ecm is bad or something is setting a ...

Ad

...your car to a brake shop for maintenance on your ABS sensors. Traction control is associated with the ABS sensors. you cant just reset them. if there is a problem they must be fixed to clear the ...

Question about GMC Sierra 1500

2 Answers

...reset the ABS and Traction Control light? There is a little grey sensor that is very easy to dislodge on the passenger side against the firewall. be certain that it is seated properly. It is easy to ...

reset . You may need a code reading tool for this operation. chevy abs sensors are also incorporated with the traction control so if the hub is bad or the abs sensor is bad will set off the codes have

Question about GMC Sierra 1500

1 Answer

ABS, Traction control and check brakes, traction and stabilitrak warnings still flashing on Changing brake pads and rotors will not solve this problem. Go to Auto Zone and have them read your computer

...reset the traction control and abs light I just put in a new motor and now the abs traction control lights are on and message on the screen telling me the all wheel drive is off too This can be reset ...

...reset abs and traction lights on 2004 colorado changed left front rotor when this showed up there is no resetting of the ABS light. it means there is a problem somewhere in the ABS system. There are ...

to erase all faults memored by ABS ECU, in other words reset the ABS system and turn off the warning lamp on dashboard. I suspect bad brake pedal switch, but you should scan the ABS & TC ECU's

...assembly and replaced abs sensor still not working code says front left malfunction replaced hub assembly and replaced abs sensor still not working what do I try now not sure reset the system

Not finding what you are looking for?
2008 GMC Sierra 1500 Logo

394 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29494 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...