2008 Chrysler Sebring "reset oil change" Questions

Ad

Question about Chrysler Sebring

1 Answer

...reset the oil sensor If you are talking about the change oil message on your cluster. You need to press step until oil change mileage appears on screen and then just press reset. If you are inquiring ...

Ad

Question about Chrysler Sebring

2 Answers

...OIL CHANGE LIGHT FLASHES THEN IT HAS RESET. THEY DIDNT RESET THE LIGHT TO DO THIS FIRST TURN THE KEY ON (BUT DO NOT START THE ENGINE ) PRESS THE GAS PEDAL DOWN THREE TIME IN TEN SECONDS THEN TURN THE ...

Ad

Question about Chrysler Sebring

2 Answers

Reset oil change message. how to reset the oil change message on an 08 chrysler sebring lx YOU TURN IGNITION TO RUN POSITION..ENGINE OFF..PRESS ACCELERATOR 3 TIMES WITHIN 10-15 SECONDS..RELEASE AND ...

Question about Chrysler Sebring

1 Answer

...oil. Light still on. How do I get it to go off? Try disconnecting neg battery cable for 10 minutes, then plug back in. It should reset the code. Otherwise use an obd2 scanner to reset it. If light is ...

...reset it? oil light on dash comes on after 5 min. Is your oil sending unit bad??? U can reset everything by unhooking the negative battery cable for a few minutes but i dont know if it will help your ...

Question about Chrysler Sebring

1 Answer

...reset the oil light do this. Turn on the key but do not start the engine. Pump the gas pedal hard three times in succession. Then turn the key fully on and start the engine. This will reset the oil ...

Question about Chrysler Sebring

2 Answers

To reset "change oil' indicator, turn ignition key to on, fully press gas pedal 3 times, turn key to off position and remove key. Next time you start the car, the 'change oil' indicator should be gone

Question about Chrysler Sebring

1 Answer

reset change oil warning 1. Get into your car and shut the door. 2. Put the key into the ignition and turn it on but DON'T start it. 3. Push the gas petal to the floor (all the way to the floor) three

...oil change could do anything to stop the engine from starting. So you have to rule out things like starter and fuel pump. to check the fuel pump go to a parts store and buy a can of starter fluid. ...

...reset the service engine soon light on a 97 sebring jxi convertable You will need to retrieve the trouble code(s) stored in the computer and repair the problem associated with that code.You cab buy a ...

Not finding what you are looking for?
2008 Chrysler Sebring Logo

322 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chrysler Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14850 Answers

Mike

Level 3 Expert

4369 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...