2008 Chrysler Sebring "brake bleeding" Questions

Ad

brake petal goes to the floor then you can pump it up. i just replaced rotors and disc pads on all 4 wheels, the petal now goes to the floor, and then you can pump it up. Chrysler sebring convertable ...

Ad

Question about Chrysler Sebring

1 Answer

...bleeding in the ABS hydraulic control block must be uses to bleed the brakes. Any good brake shop will have this tool, there is no way around this, you must use the tool to bleed the air out of ...

Ad

Question about Chrysler Sebring

1 Answer

i changed front brakes on a 2004 sebring now the pedal is soft If you opened a brake line,or bleed screw,then you will have to bleed the brakes.If not,check the calipers to see if one is not letting ...

Do the car have to be running to bleed the brakes on a 1998 chrysler sebring? Brake bleeding issues. No, not running. Also check vaccum hose to the brake booster.

DO I TURN THE CAR ON TO BLEED MY 1998 CHRYSLER CONVERTABLE 6CYL BRAKES AND WHATS THE DIAGRAHM WHICH BRAKE DO I BLEED FIRST OR DO I LEAVE THE MASTER BRAKE CYLINDER CAP OFF WHILE I DO IT TY If you are ...

...bleeding the air out of the system. Are you losing Brake Fluid and can't find a noticeable leak? Then there is a good posibility that the rear seal in the Master Cylinder is leaking and the Fluid is ...

Question about Chrysler Sebring

1 Answer

how do i bleed the brakes There are two ways. Have someone pump them til they get real hard and have them hold it., than crack on the bleeder screw for 3 seconds and lets some fluid and air drain out.

put new rear brakes , rotors and calipers on my 2001 chrysler sebring and now they wont bleed how are you bleeding them..there is a port on each one somewhere..

I changed the front brake and the calipers plus master cilinder then I try it to drive the car, but in 2 minutes I dont feel the brakes, I pushed the pedal allway down to the end there are no brekes ...

Question about Chrysler Sebring

1 Answer

Replace front brake pads How do you replace front brake pads 1. Raise vehicle 2. Support on jack stand 3. Remove lug nuts 4. Remove wheel 5. Remove bolts holding caliper 6. Remove calipers 7. Remove ...

Not finding what you are looking for?
2008 Chrysler Sebring Logo

322 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chrysler Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14850 Answers

Mike

Level 3 Expert

4369 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...