2008 Chrysler Sebring "alarm reset" Questions

...alarm sys light flashes fast then slow then it returns to flashing fast again and remains fast your alarm system needs to be reset, it is indicating that the alarm had been set off by flashing

...use your remote to lock then unlock the doors a few times. Sensors in the door lock should reset the alarm. If you dont have a remote , use your key. Do both doors as sometimes one wont do it. ...

alarm goes off. Is there a reset or what do I need to do to get this to stop. The car runs fine and I can even drive it. But every light the vehicle has is still flashing and I unplugged the horn. Try

...with the keys and then go around and unlock them with the keys and open and shut the trunk again with the keys it should reset the alarm good luck please let me know if it works for you it did for ...

Touring. How can I reset anti-theft system? Usually factory alarms will reset if you disconnect the battery and wait 30 or so minutes then reconnect.

...by the anti-theft system and won't start it will engage for a short while then cut off, the alarm sounds off and the headligths flash. a red dot shows up on the dashboard tfit8 was

...put key in ignition and turn on that will reset if doesent than have a key ,ignition or alarm malfunction that would need a dealer or mechanic certified in the security systems for chrysler ...

...keys in my 97 sebring finally got them out and the alarm to shut off but now the caet won't start...theres nothing everything works but the starter.help please try reset alarm and disarm it 2 reset ...

problems are related, the start and stall is caused by the fuel pump interupt function of the factory alarm, you triggered it when you replaced the battery, The reset procedure is in the owners manual

Alarm went off now car won't start locked keys in car used spare key and when Opened door alarm went off now car engine won't start The cars computer brain need to be reset.