Kyocera FS- 4000DTN Laser Printer "cassett door close" Questions

...door, then close it, it will keep printing for a while, then same thing happens again, opens the paper tray, close it, keeps printing, stop... you get the story... anyone have seen this issue before? ...

how to sole Canon IR 1600 check printer cover error (1)If one of the doors on the Cassette Pedestal is open, then the main unit will display the 'check printer cover' message. Check to make certain ...

...close the top door. The printer should return to a READY state. If not, proceed to Step 4. If the paper is jammed at the back of the printer, open the rear access door. While pushing the green paper ...

...close print door first When i load a dvd in the cd-r cassette to print a label on a printable discs I get an error message saying that I need to close the print door. This can't be done with the ...

THERE IS NO PAPER JAMMING BUT KEEPS ON DISPLAYING PAPERJAM open the cassettes. open and close the copier doors. does the jam clear? if so make sure the paper in the cassettes matches what the displays

...door and close it right away....After, pull just one paper cassette in it and wait to see if your paper been brought up, if so try the 2 one and so on....You probably have a bad mechanism to bring ...

...close right door'' message is on and can't do anything with copier - the door is shut. How can I fix it? The door may be closed, but there is a inter lock switch that is not being closed. If you have ...

power on - open the front door remove small cover on the right hand side press reset button - close door. The machine should now boot, but if the fault is still present a service call will be required

...close the doors does the message disappear? If so then the paper pickup roller is worn. Open the cassette remove all paper apart from one sheet. Spray a alcohol based cleaned on the leading edge

...supply motor if is working close right side cover ,i have already replaced door switch and power supply board and main board and cassette control board and fixing unit.kindly advise what can i do