Xerox Phaser 3100MFP/S Laser Printer "overheating" Questions

...TEMP. how i can get rd of this? pl help Fuser problem is that the thermistor can be damaged due to overheating Fuser thermistor or try to replace the entire fuser, clean electrical contacts which ...

Dark streaks There are dark streaks in the printing that show especially in the yellow. I've done all the cleaning protocols and replaced the maintenance kit. Help!? Dark streaks are an indication of

...any trouble with it at all. Today when I was printing it said it was over heating. Error 042-700 Overheating... Internal Temp too high You more than likely need to place a service call. Over temp ...

thermostat is overheating Hello There is a heater unit, if it is overheating then you may have to replace it. Good luck

and clean it out, (dust etc) it may having a thermo error thus shutting down to prevent any melting/overheating

Canon MP210 - printhead overheating Hi, i have recently purchased the above printer and i'm having overheating issues with the head. I've hardly used it, but when i do it prints badly and says that ...

...the 2010. Fan your paper from all four sides before using it. Also, make sure your printer isn't overheating, as overheated paper seems to make it jam as ...

porcelian rollers cracking due to heat overheating Probably not cracking due to overheating but just due to the heat of the fuser and time. The fuser can not overheat as it is protected by thermal ...

...code 5200. On printer, it is flashing P08. What does this mean? Any advice? This is a Print Head Overheating Error. You are probably printing a lot of photos all in one go and the head is ...

I have an Canon MP 830 with error 5200. What can I do to fix it myself? It started out printer head and I have taken it out and rinsed it and let it dry naturally. It is saying error print head and ...