Question about Mitsubishi WD Televison & Video
...inch not working need manual. was working last night, today no volume, no picture, lamp- red light is on. could that be the problem? no problems prior. 73 inch no power at all I unplug the cord for a ...
Question about Mitsubishi WD Televison & Video
...inch rear projection TV. I think the model # is WD-55809. Recently it started having color convergence problems - the three lights do not come together on either side of the screen; the image is good ...
...manual said to take it to a service rep. I am hoping to avoid that cost and challenge. Any advise? Thanks. Dan Hi we have a 52 inch mitsubishi high definition tv and ours did the same thing,we had a ...
...tv. Now the colors are totally messed up - everybody's face is blue and other issues. I've tried a system reset, AV reset, etc and still have the problem. Any ideas? All of the color settings are at ...
Question about Mitsubishi WD Televison & Video
...inch tv that will not start. The service dept where we purchased it said the flashing green light was due to a bad lamp. We replaced the lamp and the tv still flashes the green light and still not ...
...inch hdtv for less than $20 in parts! neals - Did everything you suggested and the TV works GREAT!!! You saved us over $300 for a silly repair that cost us less than $10. We appreciate all the info ...
...inch DLP will not turn on. I tried to turn it on last night and the tv seemed to power up but no picture was present. I tried to reset, and the same thing happened. I pressed the Menu and Input ...
inch television The television will not come on after a toddler mashed a button. I took the tv to a repair shop and it has been there since the end of May 2007. The repairman needs a service manual in
IS SET BACK IN THE TV ABOUT 5 INCHES FROM THE LAMP DOOR SUGGEST A LONG FLAT HEAD SCREWDRIVER TO LOOSEN THE LAMP. INSERT NEW LAMP AND PUT LAMP DOOR BACK ON. THERE ARE INSTRUCTIONS IN YOUR OWNERS MANUAL
Question about Mitsubishi WD Televison & Video
...manual and iv got a brandnew bulb put in PLEASE HELP My concern is that the new lamp may be having an issue and not able to hold the high voltage. If the old lamp was working, I would try this old ...
303 questions posted
Usually answered in minutes!
1,423 Questions
661 Questions
252 Questions
240 Questions
221 Questions