Question about Mitsubishi WD Televison & Video
...won39;t turn on. Can you suggest anything? I have a wd-57731 The lamp light blinked orange. i replaced the lamp turned the tv on and the timer blinks green for one minute and then the lamp light ...
Question about Mitsubishi WD Televison & Video
...won39;t come on. The lamp can39;t be test using the multimeter but you can make a visual inspection to determine its condition. Most of the faulty lamp has an obvious burnt mark. There39;s a ...
Question about Mitsubishi WD Televison & Video
won39;t turn on. System reset does nothing. Fuse OK. Are there any lights lit on the front of the TV? Have you checked for a bad lamp? When you reset the TV the timer/power light should flash on and
...won39;t. Sometimes you have to do the opposite to start it up and unplug it for some time and then try again. If you aren39;t tech savvy, don39;t worry, read the rest of this solution and watch ...
Question about Mitsubishi WD Televison & Video
...won’t turn on even without a blinking LED) This means that the switch was open and you need to have it closed to get it to work. If you tried turning on the TV with the switch open, start over by ...
Question about Sony Televison & Video
won39;t turn on light blinks a couple minuate and then turns read again and lamp light flashes red our tv won't turn on the light flashes green a couple minuates then turns red again and the
Question about Televison & Video
...won't turn on but the red light flashes saying standby. I've looked in the manual but not a great amount of detail. Does this indicate that the lamp is burned out? Is it worth fixing? ...
Question about Mitsubishi WD Televison & Video
won39;t ignite. At first my TV was just turning off on its own so I bought a new lamp. Now when I turn it on it just hums in the back and the light doesn39;t even come on, then it turns itself off
My TV won39;t turn on... power light flashes green and then flashes red... The Lamp light flashes red Replace the lamp.
...won39;t light up that39;s why it only has sound without the picture.Since you39;ve replaced the lamp twice and still the symptoms persist, I suspected that the fault came from the ballast board ...
63 questions posted
Usually answered in minutes!
1,423 Questions
661 Questions
252 Questions
240 Questions
221 Questions