Haier XQG50-11 Front Load Washer / Dryer "slot sensor washing machine" Questions

Washing Machine SW55APP2 It was running and stopped suddenly displaying error code "dE". Possible solution - Check under the lid on the right-hand side about halfway. There should be a white

i have a slot machine that says E1 were the coins show the reading,, i need help fixing this please the coin sensor has failed

sensor switch. If this switch get's sticky or bent it will not sense when the door is closed and the machine will not spin. It's usually a little slot somewhere around the edge of the door opening and

what is 551 indicate in whirlpool wasing machine. A 551 error is moisture in the slot sensor. You can dry it out and have it work, but it will just keep doing it. The only real fix is to replace it.

slot with a a 10p piece......and empty. Not the most pleasant of jobs, but effective. Good luck! E33 on a Baumatic front load (and possibly top load) is caused by no signal or out of range signal from

...sensor which tells the washer the lid is closed. What part do I need and how to replace it??? Check under the slot that engages that switch and make sure the unit is flush with the underside of the ...

...sensor and micro switch there are two more wires going to board from power supply .green is usually a ground does it have a connector on end No connector on the end. It looks like it came out of one ...

to reset? How to reset after fixing slot sensor If you wish to get some details; visit the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com

...slot sensor located in whirlpool fully automatic top loading washing machine Anuj, If you lift up the top of your unit you will find the paper work and code sheet inside that will show you all you ...

...F5 E2, and F5 E3? I've checked the electrical connections, but I cannot get my ohmeter to fit the slots to test j15 as it says in the manual...Do I replace the locking mechanism or main board. ...