Bosch DWM40L Miter Finder Digital Protractor/Angle Finder "read angle" Questions

...read a multi-purpose angle finder? Do you take the top or bottom measurement as your angle? It depends on what you want to measout. For less than a 90° angle, use the numbers below 90°. For ...

...angle and one arm (of the angle) is aligned with the protractor's bottom edge. You can now read off the size of the angle by noting the position of the other arm under the protractor's degree

...angle finder and make sure the numbers are flashing 0.0. This will be your 0 degree reading. Hold the finder closed and press the Hold button once. The display will now read 10 degrees. Open up the ...

...read on the 45 degree end that was hooked to the board for you angle. If you are trying to cut a rafter at a specific pitch such as a 6/12 you will spin the square around until the 6 on the Common ...

...precision work (0.001mm or seconds of a degree) changing this original position will affect your reading so refer to booklet within original packaging or visit mitutoyo website's (Japan, USA, UK) ...

...angle finder has locked itself on 888.8 and I can not swithch the machine off, even when I put in new batterie it does not correct itself, please can you help. Open the the moveable arm and make it ...

What do a reading- E05 mean when the instrument is turned on,this do not allow any other readings to be done and will not go off . E-05 I believe is a Horizontal angle reading error. There is nothing ...

electronic height gage is reading +.001 from 4 to Fowler Twin Beam Electronic Height Gage (model 54-174-224) is reading +.001 from 4 to 7", +.002 from 10" up. How can this be adjusted or corrected? ...

Bosch DWM 40L, Cannot seem to resetit,it reads 888.8,it wount even switch off. Open the the moveable arm and make it straight (180 degrees) or in line with the other.Take the screw off of the black ...

...read a distance The 48252 is kind of "finniky". Angle has to be good, surface not irregular or like a cusion, can't be anything in the way. There's a troubleshooting section in the manual - I have ...