Jura Capresso Impressa F7 Espresso Machine "coffee tray" Questions

...coffee tray (3 parts) and tried to place everything back in normally. The grounds basket and the tray went only partially in - they wouldn't shut completely and wouldn't come out !! A black flap from ...

...Tray". I MY Coffee machine continues to say "Empty Tray". I have done that and cleaned it thoroughly. I have turned it off and on, buit the same instruction keeps coming up. What else can I ...

...tray back. The coffee machine started the cleaning process again and it finished. I think the problem was emptying the dirty water in the tray through the back instead of the front; something must ...

Cannot insert the tray all the way Remove tray and replace leaving out the used grounds box. Restarting the machine resets the brew unit and the tray with coffee grounds box can now enter fully

Tray Missing error cannot make coffee Seems the tray is not making contact Clean the two left side contacts inside the housing where the tray fits. Note...Unplug from wall first.

...coffee grind drawer after emptying That would normally mean that the brewing mechanism is not in the at rest or start of cycle position. Take the bin off the tray and see if you can slip the bottom ...

tray without the Used Coffee Container as it is the component that usually catches against the scraper. The machine should then cycle and revert to its normal position where it will be possible to put

I keep getting tray empty message when the tray is in fact emty Try to snap out the metal contacts on the tray and clean behind them. Make sure that everything has dried up before you reassemble. Make

...tray on the inside is where I had some coffee ground  "sludge".  It was making a weak electrical connection between the two contacts.  As soon as I took a fine scrubber sponge to get ...

...tray itself. Then the coffee programm is completed and coffee is brewed. I run full service, changed all filters, cleaned all pipes and valves... it didn't help the problem of the steam coming out ...