Kenmore 64952 Electric Dryer "thermal fuze" Questions

thermal fuze has shorted out..replace your thermal fuze and all is fine..Good luck..the fuze is located by the motor blower inside the machine its white oval around 2 inches and has 2 wire leads to it

...Hi!!1 You have a shorted thermal fuze on the dryer..The thermal fuze is located in the back of the dryer its white and oval with 2 wire leads..replace it and you should be fine..good

...if I leave the cycle selector dial in an "ON" cycle. Please help!!! Hi!!! it seems that you have a bad thermal fuze located near the blower..change the thermal fuze and you should be okay..Good

...thermal fuze in my kenmore gas dryer. Now not only does the dryer not FIRE up, but when I push the button to start the dryer, it will not fire and will shut off shortly after. When I let go of the ...

...I know power goes to the button and I did check the door switch. I wonder if it is start switch or thermal fuse? hi~!!! You seem to have a bad thermal fuze shown here. its white and oval..good

...thermal fuze, thermal cut off kit, timer power resistor,high limit thermostat, checked th breaker,cleaned out the vents, the dryer runs as is should the timer advances and buzzes, there is just no ...

...fuze somewhere?Is it even worth repair if I can't do it myself?thank you it is likely the Thermal Fuse, LA 1053 kit for Performa Electric Dryers. You have to open the case, remove the drum, Loose the ...

...won't start when button is pushed. The motor sounds like it want's to start hi!! You seem to have a problem with the thermal fuze located by the blower change that and you should be fine.. heres a ...

cover of the dryer and the thermal fuze is in the back next to the heating element.Its round and black with 2 wire going into it its around half and inch thick next to the heating element ..Good luck.

no power dryer Wife had drer unloaded it was hot. reloaded pushed button ,no start. You blew a thermal fuze due to ducting clog.